469022 329200, 329201
DESERT ASSEMBLY OPTI-KLENS WALL MOUNTED EYEWASH
Wall-Mounted Emergency Eyewash Fountain. This model meets the needs
of facilities without close access to standard sinks where a face & eyewash
station is required. This face & eyewash fountain provides all of the safety
features and regulatory requirements of all Opti-Klens face & eyewash
fountains, but gives the customer an alternative to sink-installed units.
469022
Opti-Klens Wall-Mounted Face/Eyewash Fountain
DESERT ASSEMBLY OPTI-KLENS I EMERGENCY EYEWASH
Chrome-plated, solid brass eyewash unit easily installs on any existing sink or
basin faucet as a permanent eye wash fountain with unlimited water supply
in an emergency, unlike portable models. In operation, unit mounts behind
the spout, where it remains out of the way for every day use. In an emergency,
it frees both hands to hold eyes open to the flow of water. Delivering more
than twice the required water flow, it does so at a reasonable height. It will
function properly with as little as 15 lbs. of water pressure. It is restricted to
reduce high water pressure to a velocity low enough not to be injurious to the
user. No plumbing required. Two of the most common adapters are packed
with the unit. Other adapters are available from manufacturer. Meets ANSI
Standard #Z358.1-1998 for an eyewash unit. The addition of the Eliminator
Valve allows water temperature to be pre-set at the faucet and remain on.
You now have a dedicated eyewash station with only cold water available.
For sink use, the water flow is activated by the use of the push through plunger
on the Eliminator Valve. Push the plunger to the opposite side for water flow.
329200
Opti-Klens I Eyewash Fountain
329201
Opti-Klens I Eyewash w/Eliminator Valve
329202
Eliminator Valve only, for all models
DESERT ASSEMBLY OPTI-KLENS II
EMERGENCY FACE & EYEWASH
Chrome-plated, solid brass face & eyewash unit is designed to fit most
standard faucets as a permanent face wash & eyewash fountain with
unlimited water supply in an emergency. In operation, unit mounts to
the spout with two spray nozzles curving upwards. In an emergency, it
frees both hands to hold eyes open to the flow of water. Delivering more
than 3 gallons of water per minute, it does so at a reasonable height. No
plumbing required. Two of the most common adapters are packed with the
unit. Other adapters are available from manufacturer. Meets ANSI Standard
#Z358.1-1998 for an eyewash unit. The addition of the Eliminator Valve
allows water temperature to be pre-set at the faucet and remain on. You now
have a dedicated face wash & eyewash station with only cold water available.
For sink use, the water flow is activated by the use of the push through plunger
on the Eliminator Valve. Push the plunger to the opposite side for water flow.
269422
Opti-Klens II Face/Eyewash Fountain
269622
Opti-Klens II Face/Eyewash w/Eliminator Valve
Prior < Catalog >
Next
